![]() The test recording should have 3-4 seconds of silence (hold your breath) and then speak in a normal tone. There are 3 controls on the Xenyx that effect the output level from a microphone, I would start with the main fader at "0", the channel level at "0", and then turn up the trim until the leds are bouncing into the yellow on the Xenyx, then once the trim is set use the main fader for any minor adjustments.īut back to the original question I would say post sample uncorrected recordings with both setups - you can post about a 10 second mono wav file. Unlike most conventional video adapters, the Belkin USB-C to HDMI Adapter houses a 6-layer circuit board that delivers uncompromising audio-visual quality. When you are using the USC-20x how does the level as shown by the led's on the Xenyx compare with the meters in Audacity? I would expect them to hit the yellow range at about the same time. I just verified that on my own Mac there is no input level adjustment presented for my USC-202, so hopefully that's the case for your setup as well, but there is a slider turn it all the way up. On windows machines the windows OS does present a input level control, and it shows up as an adjustable slider which should always be set to the maximum. The UCA-20x units do not have any input level adjustment. Hmm well I would expect that Xenyx mixer to have no problem driving the USC-200 into clipping. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |